Felt Petal Polishing Ball, 3", Cutting and Polishing

Cut faster and brilliantly polish on every curve and contour!

Get dramatically faster results than cotton buffs and a brilliant shine with our loose-flap felt petal polishing ball. Built with multiple layers of soft felt petals that conform perfectly to curves, contours, and irregular surfaces while cutting noticeably quicker and running far cooler than solid felt bobs.

Paired with the right polishing paste and moderate pressure the felt petals can safely remove light scratches, swirl marks, water stains, tarnish, chalking and bring stainless steel, aluminum, brass, chrome, and copper to a bright, uniform pre-mirror finish.

With light pressure and a finishing polishing paste you can achieve a brilliant shine!

For a high-gloss mirror-like finish follow up with a loose-sewn fine cotton buff like our mushroom buffs! Check out #mce_temp_url#!

Key Features & Benefits:

• Small 3" dia. size works best for detailed work in tight spaces and on small objects where you need maximum control.

• 100% felt wool petals won't rip or snag and runs cool to not burn surfaces.

• Cuts faster than any cotton buff, saves time on removing light scratches, swirl marks, water stains, tarnish and chalking.

• Superb conformity, concealed shaft and loose flap petals follow curves, contours and irregular surfaces without gouging.

• Heavy duty 3/8″ arbor fits all drills.

• For best results it is recommended to use 1,800–2,500 RPM. Do not exceed 2,500 RPM. 

Usage & Care Tip:

Do not mix polishing compounds on the same buff. Dedicate a buff to each polishing compound.

Tighten the phillips head screw inside the buff fully before each use. Operate your drill at approximately 1,800 - 2,500 RPM for optimal finish and life. Use light to moderate pressure only and let the felt petals do the work. Do not exceed 2,500 RPM.

Clean the polishing ball regularly to remove embedded compound and debris by soaking the ball in soapy water for up to an hour, gently agitate by hand or machine wash on delicate with mild detergent and let air dry. Do not machine dry.

Replace when flaps are worn to half original length.